OUCO-HS 530T High Power High Speed Injection Molding Machine With Large Mold Opening Stroke
OUCO designed the Outflip crankshaft for the HS-530T, This allows us to have a lot more opening stroke compared to the normal design, so customers can choose a model with less clamping force, which can save them a lot of money. The four cylinders on our crankshaft can move in a straight line with good synchronization, which reduces power consumption.
Product Advantages
Straight pressed outward curved center clamping makes the template mold not deformed and transmits 100% clamping force of the mold.
Extra large module capacity design.
Cooperation with well-known hydraulic system manufacturers, high flow, low noise, stable performance.
Full module lubrication system, automatic lubrication, easy to operate and extend the life of the injection molding machine
Parameters
| MODEL | HS-530T |
| CLAMPING UNIT | clamping force (kN) | 5300 |
| Tie bar distance W×L (mm) | 860*760 |
| Max.Daylight(mm) | 1000 |
| Max. mold thickness (mm) | 800 |
| Min. mold thickness(mm) | 300 |
| Platen Dimensions W×L (mm) | 860*760 |
| Ejector Stroke(mm) | 210 |
| Ejector Force(Kn) | 110 |
| Ejector Quantily | 1+12 |
| Injection Unit | Screw Diameter(mm) | 100 |
| Screw L/D ratio | 22 |
| Theoretical injection volume (cm3) | 3332 |
| Shot Weight (PS) g | 3057 |
| Injection Pressure(MPa) | 113 |
| Injection Speed (g/s) | 3057 |
| Injection Rate (cm3/s) | 1247 |
| Screw Speed (rpm) | 0-200 |
| Other | Motor Power (Kw) | 95 |
| pump capacity(ml/r) | 125+125 |
| Heater Power (Kw) | 41 |
| Machine Weight (Ton) | 19 |
| Machine size L×W×H (m*m*m) | 8.7*2.0*2.1 |
Detail Pictures
Company Profile
