The "new breakthrough" of hydraulic injection molding machine, "pressure valve ring control" and "energy supply and demand matching", leads the development trend of injection molding machine!

Pressure valve loop control: Real-time comparison of actual pressure and set pressure, and correction until the actual pressure equals the set pressure.

Energy supply and demand matching: the electric system will provide as much energy as the injection molding machine needs to do its work, with very little energy loss.

Super energy saving

40% energy saving than variable pump system. 60% energy saving than fixed pump + fixed speed motor (energy saving effect varies according to the product).

High precision and high response

Adopting high-precision and high-sensitivity pressure sensor and rotary encoder, closed-loop control of pressure and flow is realized, and the error of repeated progress is less than 1%. It takes only 0.05 seconds for the servo motor to reach the maximum output power.

Low noise

The noise value is within 78db. When the machine is not moving, the servo motor stops rotating and there is almost no noise.

Saving of cooling water

Overflow heating is adopted by "no fixed pump + fixed speed motor system". The temperature of the hydraulic oil is lower, which greatly reduces the amount of cooling water.

New clamping structure

The five-point toggle clamping mechanism for internal rolling, casting linkage and template, strengthened by finite element analysis, can effectively reduce stress and deformation and improve the stiffness and accuracy of the clamping part.

New power composition

The new power system consisting of servo motor, servo driver, pressure sensor, rotary encoder, gear pump and high-precision special controller best matches the energy demand of the injection molding machine.

Product Parameters

Model		400T			500T			600T
Screw Specifications		A	B	C	A	B	C	A	B	C
Screwdi ameter	mm	65	75	80	70	75	85	75	85	90
Screw L/Dratio		22	22	22	22	22	22	22	22	22
Theoretical injection volume	cm3	1C75	1431	1628	1481	1700	2184	1788	2297	2575
Shot weight (PS)	g	1C11	1345	1530	1377	1581	2031	1645	2113	2369
injection rate(Ps)	g/S	426	568	646	G03	693	890	G13	788	884
Injection pressure	MPa	242	182	160	209	182	142	204	159	142
Inject on stroke	mm	360			385			405
Max. injection speed	mm/s	156			166			157
Screw speed	r/min	0-200			0-200			0-200
Sys. Pressure	MPa	16			16			16
Pump Motor(Min-Max)	kW	75			94			101
Displacement	ml/r	100+100			125+125			160+125
number of Motors	PC	2			2			2
Heater power	kW	35			41			47
Number oftemp. control zones		5+1			5+1			5+1
Clamping force	kN	4000			5000			6000
Opening stroke	mm	900			1000			1150
Tie bar distance W×L	mm*mm	760x660			860x760			960x860
Min. mold thickness	mm	300			300			350
Max. mold thickness	mm	730			800			920
Ejector stroke	mm	190			210			210
Ejector force forward	kN	80			110			113
Number of ejector bar	PC	1+12			1+12			1+12
Oil tank capacity	L	680			850			940
Machine dimensions(LxWxH)	mmm	8.2x1.9x1.9			87x2.0x2.1			9.3x2.1x2.3
Machine weight	Ton	15			19			23