170 Ton High Speed Plastic Thin Wall Injection Container Making Molding Machine
Extra durability achieved through optimized clamping structure- optimized platen design to disperse stress.
Accurate pause and smooth and speedy movement supported by strengthened toggle.
High-pressure lubrication system adopted in clamping unit to support machine protection during high-speed production.
The toggle's special heat-treated steel case enables higher wear resistance.
High-rigidity frame supports a smooth movement optimized clamping structure.
Optimized platen design to disperse stress- Accurate pause and smooth and speedy movement supported by strengthened toggle.
High pressure lubrication system adopted in clamping unit to support machine protection during high-speed production.
The toggle's special heat-treated steel case enables higher wear resistance- High-rigidity frame supports smooth movement.
Parameters
| MODEL | CWI-1700S III |
| CLAMPING UNIT | clamping force (kN) | 17000 |
| Tie bar distance W×L (mm) | 1600*1400 |
| Max.Daylight(mm) | 3300 |
| Max. mold thickness (mm) | 1500 |
| Min. mold thickness(mm) | 700 |
| Platen Dimensions W×L (mm) | 2350*2150 |
| Ejector Stroke(mm) | 400 |
| Ejector Force(Kn) | 341 |
| Ejector Quantily | 25 |
| | Injection unit | 18000I |
| Injection Unit | Screw Diameter(mm) | 130 | 140 | 150 |
| Screw L/D ratio | 22.6 | 21 | 19.6 |
| Theoretical injection volume (cm3) | 8821 | 10231 | 11744 |
| Shot Weight (PS) g | 8027 | 9310 | 10687 |
| Injection Pressure(MPa) | 203 | 175 | 152 |
| Injection Speed (mm/s) | 74 |
| Injection Rate (cm3/s) | 978 | 1135 | 1303 |
| Screw Speed (g/s) | 10-125 |
| Other | Motor Power (Kw) | 100 |
| pump capacity(L/min) | 750 |
| Heater Power (Kw) | 50+50+50+7.5 |
| Machine Weight (Ton) | 85 |
| Machine size L×W×H (mm) | 13500x3900x3250 |
Detail Pictures
Company Profile
